Click image to view full size image
Specifications
1. Supplier of complete grating equipments
2. Full ranges of gratings
3. Capability 6000M/T
Products Description:
1) Bearing Bar (Load Bar) Specifications (mm):
The specification of plain type and serrated type bearing bar is 20×2 to 100×9;the specification of I-section type is 25×5×3, 32×5×3, 38×5×3, 40×5×3, 50×5×3, 50×7×4, 55×7×4, 60×7×4, 65×7×4, 70×7×4, 75×7×4, etc.
2) Bearing Bar Pitch (center to center):
12.5 to 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended, America standard is available.
3) Cross Bar Pitch (center to center):
from18.5 to 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available. 4) Material: Mild Steel (Low Carbon Steel) or Stainless Steel
5) Surface Treatment:
Untreated, Painting or Hot Dipped Galvanizing
6) Steel grating standards:
A) China: YB/T4001.1-2007
B) U.S.A.: ANSI/NAAMM (MBG531-88)
C) U.K.: BS4592-1987
D) Australia: AS1657-1985
E) Japan: JJS
7) Hot Dipped Galvanizing Standards:
A) China: YB/T 13912-2002
B) U.S.A.:ASTM A123
Grate
